Do you want to create smooth, professional-looking camera movements without spending a fortune on a Steadicam or gimbal? If so, you can build your own DIY 360 rig for under $100.

 

What is an Orbit Camera Rig?

An orbit camera rig is a device that allows you to rotate a camera around a subject. This can be used to create smooth, professional-looking shots that would be difficult or impossible to achieve by hand. Orbit camera rigs can be expensive, but there are also DIY options available that can be made for under $100.

Here are some of the benefits of using an orbit camera rig:

•     Smooth, professional-looking shots
•     Ability to create unique and creative shots
•     Flexibility to adjust the speed and rotation of the camera
•     Easy to use and portable

 If you are looking for a way to create smooth, professional-looking camera movements, an orbit camera rig is a great option. There are both expensive and DIY options available, so you can find one that fits your budget and needs.

 

 

In this video, Bestboy Adam will show you how to build a versatile and easy-to-use dolly rig that can be used for a variety of shots. He will also provide a list of all the materials you'll need.

1. Four aluminum pipes (50mm diameter) -  you can find at your local dealer
2. Two aluminum plates -  you can find at your local dealer
3. Two kipp connectors -
    a. 30 mm plastic version (https://www.kippusa.com/)
    b. 50mm aluminum version 
4. Two flange bearings (https://pgnbearings.com/)
5. Steel or aluminum shaft (50mm diameter) - you can find at your local dealer
6. Two kipp cross connectors
    a. 30mm plastic version 
    b. 50 mm aluminum version 
7. 50 mm aluminum clamps (https://eu.duratruss.com )
8. Two cheapest steel double clamps for 50mm pipe (https://www.layher.co.nz/)
9. Aluminum double clamps (https://www.thomannmusic.com) 

10. Counterweight (optional)

Instructions

•     Start by making a base for the dolly. This can be a simple table or platform made from the aluminum plates and keep connectors.
•     Attach the shaft to the base using the flange bearings.
•     Mount the pipes to the shaft using the clamps.
•     Mount the camera to the short piece of pipe using the double clamps.
•     If desired, add a counterweight to the opposite side of the dolly to balance the weight of the camera.

Tips

•     Use heavier-duty materials if you plan on using the dolly with a large or heavy camera.
•     Make sure the pipes are securely attached to the shaft and the base.
•     Adjust the length of the pipes to create different shots.
•     Add a counterweight to balance the weight of the camera.

Conclusion

With a little time and effort, you can build your own DIY camera dolly rig for under $100. This rig will give you the ability to create smooth, professional-looking camera movements without spending a fortune.

Here are some additional tips for using your DIY camera dolly rig:

•     Use a remote shutter release to avoid camera shake.
•     Practice moving the dolly smoothly and evenly.
•     Experiment with different shots to see what you can create.

With a little practice, you'll be creating amazing camera movements with your DIY camera dolly rig in no time!